How to Install a Shower Filter in Minutes
One of the best things about a filtered showerhead is how easy it is to install. You don't need a plumber, special tools, or any plumbing experience. If you can unscrew a jar, you can install a shower filter. Here's a step-by-step walkthrough for getting your Aqumori filtered showerhead up and running in minutes.
What You'll Need
- Your new Aqumori Filtered Showerhead (or High Pressure model)
- A cloth or towel (to protect the finish)
- Plumber's tape (optional, but recommended for a watertight seal)
- An adjustable wrench or pliers (optional — hand-tightening is usually sufficient)
Step-by-Step Installation Guide
Step 1: Remove Your Existing Showerhead
Turn off the water supply or simply make sure the shower is off. Grip your existing showerhead and turn it counterclockwise to unscrew it from the shower arm. If it's tight, use a cloth to protect the finish and apply gentle pressure with pliers or a wrench. Most showerheads come off easily by hand.
Step 2: Clean the Shower Arm Threads
Once the old showerhead is off, wipe down the threads on the shower arm with a dry cloth. Remove any old plumber's tape or mineral buildup. Clean threads help ensure a good seal with your new showerhead.
Step 3: Apply Plumber's Tape (Recommended)
Wrap 2–3 layers of plumber's tape (also called Teflon tape) clockwise around the shower arm threads. This helps create a watertight seal and prevents leaks. It's an optional step, but it's quick and worth doing.
Step 4: Attach the Aqumori Filtered Showerhead
Hand-tighten the Aqumori showerhead onto the shower arm by turning it clockwise. Tighten until snug — firm hand pressure is usually enough. If needed, use a cloth and wrench to give it a final quarter-turn, but avoid over-tightening.
Step 5: Turn On the Water and Check for Leaks
Turn the water on and let it run for 30–60 seconds. This flushes the new filter cartridge and primes the system. Check around the connection point for any drips. If you see a leak, turn off the water, tighten slightly, and check again.
Step 6: Enjoy Your Filtered Shower
That's it. Your Aqumori filtered showerhead is installed and ready to use. The filter is already in place — no additional setup required.
Tips for a Leak-Free Installation
- Don't skip the plumber's tape — it takes 30 seconds and prevents most leaks
- Hand-tighten first, then use a tool only if needed
- Avoid over-tightening, which can crack the showerhead housing
- If you see a slow drip, a small additional turn is usually all it takes
What About the Filter Cartridge?
Your Aqumori showerhead comes with a filter cartridge already installed. Over time, the cartridge will need to be replaced to maintain filtration performance. As a general guideline, plan to replace it every few months depending on your water quality and usage.
When it's time, the Aqumori replacement filter cartridge swaps in just as easily as the showerhead installed. For timing guidance: How Often Should You Replace a Shower Filter Cartridge?
Not sure if a filtered showerhead is right for you? Read: What Is a Filtered Showerhead and Do You Need One?
Frequently Asked Questions
Do I need a plumber to install a filtered showerhead?
No. Aqumori's filtered showerheads connect to standard shower arm fittings and install without professional help. The process takes just a few minutes.
What if my shower arm has a non-standard fitting?
Aqumori's showerheads are designed for standard shower arm fittings found in most homes. If you have an unusual setup, check your shower arm thread size before purchasing.
Can I take the showerhead with me if I move?
Yes. Since installation requires no permanent modifications, you can unscrew the Aqumori showerhead and reinstall your original showerhead when you move. It's a great option for renters.
How do I know the filter is working?
A fresh filter cartridge will reduce chlorine smell and may make your water feel softer. If you notice the chlorine smell returning over time, it's a sign the cartridge is due for replacement.
The Bottom Line
Installing a shower filter is one of the easiest bathroom upgrades you can make. With Aqumori's filtered showerheads, the whole process takes just a few minutes and requires no special skills or tools.